Solved Hi i am in great need of assistance

K

krisda1

New Member
Level of Knowledge: Intermediate
PC: Homemade 64bit components
OS: Vista Home Premium 64bit

Hi guys about 4 weeks ago i reinstalled windows due to my vista being corrupt, i formatted the hardrive and everything seemed fine. When i woke up this morning and turned my pc on it said that windows failed to log me on because it couldnt access the event log.Now i looked in the event viewer and clicked on the error and it said this:

The LoadUserProfile call failed with the following error:
An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.

Now when i clicked the look online help button at bottom of page i did all that it said to do and restarted my pc and same problem persists. i have run a virus scan 2 times today and i have run a spybot scan today and there is nothing there.

I really would like some help in resolving this issue ASAP as my computer will corrupt again if its not sorted soon.

Below is a image of my event viewer screen so you guys can see.
 

Attachments

  • Capture 2.JPG
    Capture 2.JPG
    88.2 KB · Views: 31

My Computer

System One

Hi here is an added picture to show you what happens when i log in, if someone could help me i would be really grateful.
 

Attachments

  • Capture 5.JPG
    Capture 5.JPG
    9.5 KB · Views: 25

My Computer

System One

Hello Krisda, and welcome to Vista Forums.

If one is available, you might see if doing a system restore at boot using a restore point dated before this happened may be able to fix it for you. If not, then you may need to do anothe clean install of Vista.

Hope this helps,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
omg this will be the 5th clean install since i started getting this error it seems to keep happening about a week after i wipe my hardrive and reinstall vista and system restore doesnt work either. so i need some othe help, but cant afford to pay £60 for official support
 

My Computer

System One

Was there anything that you installed, ran (ex: registry cleaner), or changed right before this happened?
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
no i installed something 5 days before it started happening, i went to my coomputer last night and turned it off and when i awoke this morning it was like how it is now
 

My Computer

System One

What was it that you installed, and did you install the same program on previous occasions?
 

My Computer

System One

  • Manufacturer/Model
    Dwarf Dwf/11/2012 r09/2013
    CPU
    Intel Core-i5-3570K 4-core @ 3.4GHz (Ivy Bridge) (OC 4.2GHz)
    Motherboard
    ASRock Z77 Extreme4-M
    Memory
    4 x 4GB DDR3-1600 Corsair Vengeance CMZ8GX3M2A1600C9B (16GB)
    Graphics Card(s)
    MSI GeForce GTX770 Gaming OC 2GB
    Sound Card
    Realtek High Definition on board solution (ALC 898)
    Monitor(s) Displays
    ViewSonic VA1912w Widescreen
    Screen Resolution
    1440x900
    Hard Drives
    OCZ Agility 3 120GB SATA III x2 (RAID 0)
    Samsung HD501LJ 500GB SATA II x2
    Hitachi HDS721010CLA332 1TB SATA II
    Iomega 1.5TB Ext USB 2.0
    WD 2.0TB Ext USB 3.0
    PSU
    XFX Pro Series 850W Semi-Modular
    Case
    Gigabyte IF233
    Cooling
    1 x 120mm Front Inlet 1 x 120mm Rear Exhaust
    Keyboard
    Microsoft Comfort Curve Keyboard 3000 (USB)
    Mouse
    Microsoft Comfort Mouse 3000 for Business (USB)
    Internet Speed
    NetGear DG834Gv3 ADSL Modem/Router (Ethernet) ~4.0 Mb/s (O2)
    Other Info
    Optical Drive: HL-DT-ST BD-RE BH10LS30 SATA Bluray
    Lexmark S305 Printer/Scanner/Copier (USB)
    WEI Score: 8.1/8.1/8.5/8.5/8.25
    Asus Eee PC 1011PX Netbook (Windows 7 x86 Starter)
no i installed a game this time around the previous time was AVG and the other times i cant remember

u dont think that i have a worm or trojan horse on my pc do you? i ran spybot everyday and avg and never got anything come up. Man if i dont sort this soon i will get the Blue screen of death again and do fresh install and lose all important docs
 

My Computer

System One

What are your system specs, in particular your motherboard?
 

My Computer

System One

  • Manufacturer/Model
    Dwarf Dwf/11/2012 r09/2013
    CPU
    Intel Core-i5-3570K 4-core @ 3.4GHz (Ivy Bridge) (OC 4.2GHz)
    Motherboard
    ASRock Z77 Extreme4-M
    Memory
    4 x 4GB DDR3-1600 Corsair Vengeance CMZ8GX3M2A1600C9B (16GB)
    Graphics Card(s)
    MSI GeForce GTX770 Gaming OC 2GB
    Sound Card
    Realtek High Definition on board solution (ALC 898)
    Monitor(s) Displays
    ViewSonic VA1912w Widescreen
    Screen Resolution
    1440x900
    Hard Drives
    OCZ Agility 3 120GB SATA III x2 (RAID 0)
    Samsung HD501LJ 500GB SATA II x2
    Hitachi HDS721010CLA332 1TB SATA II
    Iomega 1.5TB Ext USB 2.0
    WD 2.0TB Ext USB 3.0
    PSU
    XFX Pro Series 850W Semi-Modular
    Case
    Gigabyte IF233
    Cooling
    1 x 120mm Front Inlet 1 x 120mm Rear Exhaust
    Keyboard
    Microsoft Comfort Curve Keyboard 3000 (USB)
    Mouse
    Microsoft Comfort Mouse 3000 for Business (USB)
    Internet Speed
    NetGear DG834Gv3 ADSL Modem/Router (Ethernet) ~4.0 Mb/s (O2)
    Other Info
    Optical Drive: HL-DT-ST BD-RE BH10LS30 SATA Bluray
    Lexmark S305 Printer/Scanner/Copier (USB)
    WEI Score: 8.1/8.1/8.5/8.5/8.25
    Asus Eee PC 1011PX Netbook (Windows 7 x86 Starter)
OS: Windows Vista 64 bit home edition
Motherboard: ASUS P5N32-E SLI PLUS
RAM: 8GB Gold DDR2
Graphics Card: 8800GT GeForce Series 8 512MB
Processor: Intel Quad Core 2.4GHz

is there anyhting else u need to know?
 

My Computer

System One

what power supply are you running? i had power supply fail on me and it gave all kinds of wacky errors like what you are getting.
 

My Computer

System One

  • CPU
    intel core 2 quad Q9450
    Motherboard
    gigabyte EP45-DQ6
    Memory
    8gb Gskill PC6400
    Graphics Card(s)
    Visiontek Radeon 4870x2 2GB
    Sound Card
    X-FI fatality FPS 7.1
    Monitor(s) Displays
    Viewsonic VG2230wm
    Screen Resolution
    1680X1050
    Hard Drives
    VelociRaptor WD1500HLFS 150GB 10000 RPM,
    WD CAVIAR black 750GB
    PSU
    Antec TruePower New TP-750 watt
    Case
    Cooler Master HAF932
    Cooling
    XIGMATEK HDT-S1283 120mm Rifle CPU Cooler
    Internet Speed
    comcast 16mb\second
nah its not my power supply my power supply is working ok i even got an update for it couple months back :P. i enabled hidden admin account loggend into that set it a password then loggend into my main and everything is fine will try restart to see if all is well
 

My Computer

System One

My Computer

System One

  • Manufacturer/Model
    Dwarf Dwf/11/2012 r09/2013
    CPU
    Intel Core-i5-3570K 4-core @ 3.4GHz (Ivy Bridge) (OC 4.2GHz)
    Motherboard
    ASRock Z77 Extreme4-M
    Memory
    4 x 4GB DDR3-1600 Corsair Vengeance CMZ8GX3M2A1600C9B (16GB)
    Graphics Card(s)
    MSI GeForce GTX770 Gaming OC 2GB
    Sound Card
    Realtek High Definition on board solution (ALC 898)
    Monitor(s) Displays
    ViewSonic VA1912w Widescreen
    Screen Resolution
    1440x900
    Hard Drives
    OCZ Agility 3 120GB SATA III x2 (RAID 0)
    Samsung HD501LJ 500GB SATA II x2
    Hitachi HDS721010CLA332 1TB SATA II
    Iomega 1.5TB Ext USB 2.0
    WD 2.0TB Ext USB 3.0
    PSU
    XFX Pro Series 850W Semi-Modular
    Case
    Gigabyte IF233
    Cooling
    1 x 120mm Front Inlet 1 x 120mm Rear Exhaust
    Keyboard
    Microsoft Comfort Curve Keyboard 3000 (USB)
    Mouse
    Microsoft Comfort Mouse 3000 for Business (USB)
    Internet Speed
    NetGear DG834Gv3 ADSL Modem/Router (Ethernet) ~4.0 Mb/s (O2)
    Other Info
    Optical Drive: HL-DT-ST BD-RE BH10LS30 SATA Bluray
    Lexmark S305 Printer/Scanner/Copier (USB)
    WEI Score: 8.1/8.1/8.5/8.5/8.25
    Asus Eee PC 1011PX Netbook (Windows 7 x86 Starter)
Hi all this is copied straight from microsoft website i follow its instructions but it still doesnt resolve the problem. Is this a problem with vista sp2 or just a problem with that service?

Event ID 7005 — Basic Service Control Manager Operations
Updated: December 11, 2007
Applies To: Windows Server 2008
cc756350.red%28en-us,WS.10%29.jpg
The basic operations that Service Control Manager (SCM) performs include managing the services and driver services that allow the operating system to start successfully, and reporting when one of these services or driver services fail during system startup. These operations are not associated with any particular service.
Event Details

Product: Windows Operating System ID: 7005 Source: Service Control Manager Version: 6.0 Symbolic Name: EVENT_CALL_TO_FUNCTION_FAILED Message: The %1 call failed with the following error:
%2 Resolve

Review the event log messages

To resolve this issue, review the Event logs and note if any other events have been logged by the Service Control Manager (SCM) Eventlog Provider. The event log message and related events logged by the SCM should help you to further troubleshoot and resolve the issue. Some examples are provided below.
To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

  1. If event ID 7011 is also logged for a service, then extending the service timeout period to resolve event ID 7011 would also resolve this error.
  2. If event ID 7034 is also logged for a service, then restoring the service default settings to resolve event ID 7034 would also resolve this error.
If the issue remains unresolved, contact Microsoft support and provide the error information. For information about how to contact Microsoft support, see Support Options from Microsoft Services (Microsoft Services Home).
To review the events logged by the SCM:

  1. Open Event Viewer by clicking the Start button, Control Panel, and Administration Tools, then double-clicking Event Viewer. Note: For Windows Vista, use the Classic View display option in Control Panel to see the Administration Tools.
  2. Click Event Viewer (Local), then Windows Logs and System.
  3. In the details pane, click on the Source column to view the events sorted by the entity that logged that event. For events logged by the SCM, the source is the Service Control Manager Eventlog Provider.
Verify

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.
To verify that the Service Control Manager (SCM) is successfully sending commands to services:

  1. Open the Services snap-in by clicking the Start button, Control Panel, and Administrative Tools, then double-clicking Services. Note: For Windows Vista, use the Classic View display option in Control Panel to see the Administration Tools.
  2. Right-click on a stopped service that is not a system service and select Start. If the SCM was successful in starting the service, the Status field for that service will display Started.
To verify that the Service Control Manager is logging service events correctly:

  1. Open Event Viewer by clicking the Start button, Control Panel, and Administration Tools, then double-clicking Event Viewer. Note: For Windows Vista, use the Classic View display option in Control Panel to see the Administration Tools.
  2. Click Event Viewer (Local), then Windows Logs and System.
  3. In the details pane, click on the Source column to view the events sorted by the entity that logged that event. For events logged by the SCM, the source is the Service Control Manager Eventlog Provider.
  4. Review the events and confirm that event ID 7036 was logged for the action taken by the SCM in step 1 of the To verify that the Service Control Manager is successsfully sending commands to services procedure above.
 

My Computer

System One

An Update for a power supply ? ?

Never heard of that...
 

My Computer

System One

  • CPU
    Intel Q6600
    Motherboard
    ASUS P5K MBoard.
    Memory
    4G OCZ PC2 8500 Platinum
    Graphics Card(s)
    EVGA 8800GTS Vid Card
    Hard Drives
    500G Seagate SATA
    200G Seagate SATA
    100G WD Caviar SATA
    80G WD Caviar IDE
    PSU
    OCZ Elite 800W PSU
    Case
    RaidMax Smilodon Case
    Other Info
    Lite-On dual layer DVD burner X 2
    Dos 6.2;Win2K;XP; &
    Vista Ultimate 64Bit.
patio said:
An Update for a power supply ? ?

Never heard of that...
Click to expand...

i think he means he updated the power supply (got a new one ;))

i reckon if it still has the same problem after 5 custom installs, there might be corrupt or missing files on the recovery/vista dvd. if you can get a blank dvd and and burn an iso image onto the dvd

Dom
 

My Computer

System One

  • Manufacturer/Model
    Acer 5735z Laptop
    CPU
    2.0 ghz intel pentium dual-core processor t4200 800mhz fsb
    Motherboard
    Acer CathedralPeak Rev
    Memory
    4gb
    Graphics Card(s)
    Integrated Intel Graphics Media Accelerator 4500
    Sound Card
    Realtek
    Monitor(s) Displays
    15.6" HD CineCrystal LCD
    Screen Resolution
    1366x768
    Hard Drives
    160gb stock drive. ATA
    Case
    Stock Notebook
    Cooling
    Stock
    Keyboard
    PS/2
    Mouse
    Synaptics TouchPad
    Internet Speed
    No idea
Hi all thanks for all of the help i appreciate it but i was being such an idiot i thought every driver was updated on my pc but it seems that my graphics card driver had installed a newer version but didnt uninstall an older version so there was a conflict there and this was causing my pc alot of problems.

So.... I uninstalled everything from my pc that had anything to do with Nvidia stuck in my disk that came with graphics card and installed all of those drivers. Then went to nvidia website and updated manually to the newest drivers.

All is well now pc is not making a chugga noise when it is running anymore and havent had that error for quite a while now.

Will speak to you all soon

Peace Out :cool:
 

My Computer

System One

Krisda,

I'm happy to hear that you got it sorted. Thank you for posting back with your results. :)
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
You must log in or register to reply here.
Back
Top