BLue screen Crash

[jjbojangles]

I keep getting a blue screeen Crash about every 10 minutes.
I captured the code.
stop: 0x0000000A (0x00000000, 0x00000002, 0x00000001, 0x81CADDF8)

Can anybody help me find a fix???? this is on a toshiba laptop less than a year old the only software every added to this is a cordless mouse. i use it for strictly surfing and email.

 

[Airbot]

Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

The IRQL_NOT_LESS_OR_EQUAL bug check has a value of 0x0000000A. This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
Parameters

The following parameters are displayed on the blue screen.
ParameterDescription 1Memory referenced 2IRQL at time of reference 30: Read

1: Write

4Address which referenced memory
Cause

This bug check is issued if paged memory (or invalid memory) is accessed when the IRQL is too high.
The error that generates this bug check usually occurs after the installation of a faulty device driver, system service, or BIOS.
If you encounter bug check 0xA while upgrading to a later version of Windows, this error might be caused by a device driver, a system service, a virus scanner, or a backup tool that is incompatible with the new version.
Resolving the Problem

If a kernel debugger is available, obtain a stack trace.
To resolve an error caused by a faulty device driver, system service, or BIOS

1. Restart your computer.
2. Press F8 at the character-based menu that displays the operating system choices.
3. Select the Last Known Good Configuration option from the Windows Advanced Options menu. This option is most effective when only one driver or service is added at a time.

To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

1. Check the System Log in Event Viewer for error messages that might identify the device or driver that caused the error.
2. Try disabling memory caching of the BIOS.
3. Run the hardware diagnostics supplied by the system manufacturer, especially the memory scanner. For details on these procedures, see the owner's manual for your computer.
4. Make sure the latest Service Pack is installed.
5. If your system has small computer system interface (SCSI) adapters, contact the adapter manufacturer to obtain updated Windows drivers. Try disabling sync negotiation in the SCSI BIOS, checking the cabling and the SCSI IDs of each device, and confirming proper termination.
6. For integrated device electronics (IDE) devices, define the onboard IDE port as Primary only. Also, check each IDE device for the proper master/subordinate/stand-alone setting. Try removing all IDE devices except for hard disks.