Crazy Motherboard?

[stoneys-nutz]

Also have a read through the users manual that came with your MB. You will find your Bios and other parts of your MB explained in there.

 

[mpcrsc562]

The factory stock timings are 5-5-5-15 but my motherboard auto set the timings to 5-5-5-18
so i manualy set the timings to 5-5-5-15.
Do i have to change any voltage?
Do i have to change the ram voltage to 2.2V?
(Now they are auto set from the motherboard to 2.1V)

Hi panias........

you wont need to alter your RAM voltage to run the sticks @ default timings i wouldn't of thought.....

have you read through the stickies in this sub section..

as skunksmash stated, you shouldn't have to change your ram voltage, but if you're not stable, you might have to. my ram (corsair twin2x4096-c5) is 2.1v listed on the stick. however, when my board auto sets timings and volts, it sets the volts to 1.8--correct timings, but not the voltage that's listed on the stick. for my setup, that presented a problem--stability. everything worked well when i left the timings as they were and upped the ram voltage to 2.1v.