• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Vista and Compaq Presario C700

Dwarf

The Contemplator
Vista Guru
Gold Member
Messages
2,760
Location
Doncaster, UK
#1
The following was sent to me as a PM. I have reposted it here so that others may be able to assist Betsy with her problem.

bessiemickol said:
Please help, i have tried everything, my computer will not start up and when I put in recovery disk I recieve an error message on disk 7 0x4001100200001005, I have recovery and repair cd and it does nothing states I have no driver or any operating system on the computer and when I try to install it will not stating that i am missing driver. I have been looking for answers for days now and many hours but I see you do know what you are talking about a lot, please point me in the right direction! Thanks, Betsy
 

My Computer

System One

  • Manufacturer/Model
    Dwarf Dwf/11/2012 r09/2013
    CPU
    Intel Core-i5-3570K 4-core @ 3.4GHz (Ivy Bridge) (OC 4.2GHz)
    Motherboard
    ASRock Z77 Extreme4-M
    Memory
    4 x 4GB DDR3-1600 Corsair Vengeance CMZ8GX3M2A1600C9B (16GB)
    Graphics Card(s)
    MSI GeForce GTX770 Gaming OC 2GB
    Sound Card
    Realtek High Definition on board solution (ALC 898)
    Monitor(s) Displays
    ViewSonic VA1912w Widescreen
    Screen Resolution
    1440x900
    Hard Drives
    OCZ Agility 3 120GB SATA III x2 (RAID 0)
    Samsung HD501LJ 500GB SATA II x2
    Hitachi HDS721010CLA332 1TB SATA II
    Iomega 1.5TB Ext USB 2.0
    WD 2.0TB Ext USB 3.0
    PSU
    XFX Pro Series 850W Semi-Modular
    Case
    Gigabyte IF233
    Cooling
    1 x 120mm Front Inlet 1 x 120mm Rear Exhaust
    Mouse
    Microsoft Comfort Mouse 3000 for Business (USB)
    Keyboard
    Microsoft Comfort Curve Keyboard 3000 (USB)
    Internet Speed
    NetGear DG834Gv3 ADSL Modem/Router (Ethernet) ~4.0 Mb/s (O2)
    Other Info
    Optical Drive: HL-DT-ST BD-RE BH10LS30 SATA Bluray
    Lexmark S305 Printer/Scanner/Copier (USB)
    WEI Score: 8.1/8.1/8.5/8.5/8.25
    Asus Eee PC 1011PX Netbook (Windows 7 x86 Starter)

Dwarf

The Contemplator
Vista Guru
Gold Member
Messages
2,760
Location
Doncaster, UK
#2

My Computer

System One

  • Manufacturer/Model
    Dwarf Dwf/11/2012 r09/2013
    CPU
    Intel Core-i5-3570K 4-core @ 3.4GHz (Ivy Bridge) (OC 4.2GHz)
    Motherboard
    ASRock Z77 Extreme4-M
    Memory
    4 x 4GB DDR3-1600 Corsair Vengeance CMZ8GX3M2A1600C9B (16GB)
    Graphics Card(s)
    MSI GeForce GTX770 Gaming OC 2GB
    Sound Card
    Realtek High Definition on board solution (ALC 898)
    Monitor(s) Displays
    ViewSonic VA1912w Widescreen
    Screen Resolution
    1440x900
    Hard Drives
    OCZ Agility 3 120GB SATA III x2 (RAID 0)
    Samsung HD501LJ 500GB SATA II x2
    Hitachi HDS721010CLA332 1TB SATA II
    Iomega 1.5TB Ext USB 2.0
    WD 2.0TB Ext USB 3.0
    PSU
    XFX Pro Series 850W Semi-Modular
    Case
    Gigabyte IF233
    Cooling
    1 x 120mm Front Inlet 1 x 120mm Rear Exhaust
    Mouse
    Microsoft Comfort Mouse 3000 for Business (USB)
    Keyboard
    Microsoft Comfort Curve Keyboard 3000 (USB)
    Internet Speed
    NetGear DG834Gv3 ADSL Modem/Router (Ethernet) ~4.0 Mb/s (O2)
    Other Info
    Optical Drive: HL-DT-ST BD-RE BH10LS30 SATA Bluray
    Lexmark S305 Printer/Scanner/Copier (USB)
    WEI Score: 8.1/8.1/8.5/8.5/8.25
    Asus Eee PC 1011PX Netbook (Windows 7 x86 Starter)

Bare Foot Kid

R.I.P. August 13th 2014
Messages
2,616
Location
The Lowcountry
#3
Hello Betsy, welcome to Vista forums!

Maybe these instructions will help you.


HP Recovery Center

Be advised that this will take the machine back to the point when you first took it of the box.
The "HP Recovery Center" will give you the option to send to backup anything you
don't want to lose, so have backup media available to use if you choose this option.

With the machine off press the power button, as soon as you do that start tapping the F11 key.
That should take you to the HP Recovery Center. When there just follow the prompts.
It is pretty much self explanatory. From the time you boot into F11 (not counting
any backups you choose to make) you should be back on a working desktop in about
30 minutes. After it restarts just follow the prompts again to finish the process.

If your first option is system restore select no, which should take you to system recovery.
You want to try system recovery not system restore, unless you have good restore points!

I sure hope you find a solution, please keep us informed!


Later :shock: Ted
 

My Computer

System One

  • Manufacturer/Model
    * BFK Customs *
    CPU
    Intel C2Q 9550 Yorkfield
    Motherboard
    ASUS P5Q Pro
    Memory
    8GB Dominator 8500C5D
    Graphics Card(s)
    XFX ATI 1GB 4870 XXX
    Sound Card
    Realtek HD 7-1
    Monitor(s) Displays
    1x 47" LCD HDMI & 2x 26" LCD HDMI
    Screen Resolution
    1920x1080P & 1920x1200
    Hard Drives
    2x 500GB 7200RPM 32MB Cache WD Caviar Black
    PSU
    Corsair 620HX
    Case
    CM Cosmos RC-1000
    Cooling
    Tuniq Tower 120, 2x 140mm and 3x 120mm case fans
    Mouse
    Razer Diamondback 3G
    Keyboard
    HP Enhansed Multimedia
    Internet Speed
    18.6Mb/s
    Other Info
    My First Build ;)

Arc1234

New Member
Messages
1
#4
Hello.
I had the same problem today. The problem is (or at least with mine) was that the computer is trying to recover from the recovery partition and not the disc. Press F10 on boot up and change the boot order so the CD/DVD drive boots first instead of the hard drive. Then the recovery disc will work. This is what tech support told me to do and it worked! The computer was trying to recover from the boot partition that deletes itself when you make a recovery disc, so it gives that error message.
 

My Computer

JackieTKD

New Member
Messages
3
#5
I have the same problem on an HP Pavilion a6112n

I have the same problem on an HP Pavilion a6112n- going on 2 weeks now. All I want to do is reinstall the factory settings.
I've been using the recovery disks and never get passed 84%. The 'recovery from Hard Drive' Option does not work- When booting from the hard drive I get a blank(black) screen with a blinking cursor in the top left.
Hardware Diagnostics says everything passed, so HP says it must be my recovery disks. I'm 42 days past my 1 year warrantee, so HP wants ME to PAY For new recovery disks.
I'm ticked-off at HP. I made the recovery disks as recommended, but this solution simply does not work.

Ok, I’m done ranting. Lol! Here’s where I’m at:
Cleaned the smudgesI’ve tried cleaning the smudges. Right now, I am making copies of the disks- hoping it’s just a scratch in the disks
These are the error messages I've received after the 84 % wait :
0x400110020000100a
0x400110020000100c
0x4001100200001005
Can anyone make a recommendation? Or perhaps recommend a free/super-cheap way to get new disks???
Any help is SUPER-appreciated!
Jackie
 

My Computer

Messages
10
Location
Melbourne, VIC
#6
Another voice to the discussion. I am experiencing sudden computer freeze (compaq presario c700 (c792VU). One program running (VLC to listen to some music). Computer stopped, black screen. Restored to previous restore point. Disintalled VLC. THen it stopped with only IExplore open. Did not black out, but froze. Could not do ctrl-alt-del, cursor not working.
HP web page is completely useless
Notebook Stops Responding when Using a Program 

I run a diagnostic software and everything seems to be fine.
I have no clue whether it is something related to the video board or Vista or a particular program (have not installed anything dodgy though).

Any hint on how to understand what the problem is would be much appreciated.
THanks
rob
 

My Computer

Users Who Are Viewing This Thread (Users: 1, Guests: 0)