Solved Help with new problems new board

[nostaw5]

Hello,

I got a new board and here are the problems,

trying to install windows XP:

-BSOD IRQL-Something something
-Errors after setup installed on HDD during the finalising install


VISTA:
-BSOD same as XP and memory management
-Errors after whole install complete userinit- and more

7:
-BSOD TOP_POOL_HEADER, MEMORY_MANAGEMENT while on Expanding Windows Files
-BSOD after install Complete


WHAT I DID (BUT DID NOT WORK)

Install from laptop SATA HDD (worked for a while)
Set HDD to slave
Looked in BIOS for anything
Swapped motherboards and everything fine. EXCEPT my OLD motherboard wont let me use GPU.


CAN ANYONE HELP?

 

[richc46]

If you give me the required information, I may be able to help
http://www.vistax64.com/crashes-debugging/282419-blue-screen-death-bsod-posting-instructions.html

 

[nostaw5]

How can i do that if: I cant Install windows. I might go linux

 

[richc46]

LOL good point. Would ubuntu help?
Use Ubuntu Live CD to Backup Files from Your Dead Windows Computer - How-To Geek
You dont need backup, but this will show you how to get in.

 

[nostaw5]

Heh LOL i think my hard drive died. Well actually my hdd is reconised by my limited capabilitied Mobo ONTAI OT LM4 BUT my NEW socket 775 ASUS wont no what IDE cable or jumper i set the HDD to. And i was kidding about ubuntu cuz i need windows to play games. Maybe i need more memory cuz i have a nvidia with turbo cache maybe it takes all that up resulting in buescreen. BUTTTTT i dont have much money.

 

[richc46]

Heh LOL i think my hard drive died. Well actually my hdd is reconised by my limited capabilitied Mobo ONTAI OT LM4 BUT my NEW socket 775 ASUS wont no what IDE cable or jumper i set the HDD to. And i was kidding about ubuntu cuz i need windows to play games. Maybe i need more memory cuz i have a nvidia with turbo cache maybe it takes all that up resulting in buescreen. BUTTTTT i dont have much money.

If it is hard drive, memory or other hardware not much can be done until its repaired.

 

[nostaw5]

Yes but it strangely works on my OLD mobo. Besides most of the bluescreens are to do with memory allocation on google also it might be defective memory. but the ram also works on the mobo....

 

[richc46]

When memory is bad you must test the slots and the ram.

 

[nostaw5]

ahhhh. and how would i do that.........

 

[richc46]

You could use this test
Download memtest86 and test RAM
www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
Run for 8 passes
If passes try a good stick in each slot for 3 passes
If fails do the same for 8 passes.
Guide to using Memtest86+

 

[nostaw5]

ill try but that wont explain why my HDD is not reconized by the new motherboard. Here is the setup


4 SATA: no HDDS attached
1 IDE: HDD master 1 DVD/CD Drive slave.

i have tried swaping and taking the dvd drive out but noting works.

for the old motherboard the post completes but for the new it stops at SMART capable.

 

[MrNeeds]

What type of IDE hard drive is it? (brand and model if you know it), the jumpers aren't as confusing as you think they are, the beauty of jumpers are that if you mess up, just swap them around ;-)

Dave

 

[nostaw5]

The hard drive is a seagate barracuda 80GB 7200.00 RPM i put the SSD's away for this. Its an ordinary IDE 133/something

the jumpers on the HDD and optical drive i messed around with. eg dvd master hdd slave or slave dvd and master HDD EVEN CABLE select did not work.


also my old celeron 336 is running at 40-50 degrees and my ddr2 800 is showing up as 200MHz in cpu-z

 

[MrNeeds]

The hard drive is a seagate barracuda 80GB 7200.00 RPM i put the SSD's away for this. Its an ordinary IDE 133/something

the jumpers on the HDD and optical drive i messed around with. eg dvd master hdd slave or slave dvd and master HDD EVEN CABLE select did not work.


also my old celeron 336 is running at 40-50 degrees and my ddr2 800 is showing up as 200MHz in cpu-z

Have you got the settings in the CMOS set to automatic for hard drive detection?

All seems normal on the stats side, processors cooking a bit hot but nothing that would make it fail, CPU-Z registers my RAM at 333 when it's actually 1066 so...

Dave

 

[nostaw5]

oh here re the results of memtest 3 mins into it:

test 6

pass 26% test 98% erros: 87552 and counting

 

[MrNeeds]

I've never used memtest86 in my life.... Rich?

Dave

 

[nostaw5]

OK out of 8 tests

74% passed

on the table:

tst 8 - PASS 0 Failing addresses TOO MANY / errors: 251648

what does this mean?

 

[MrNeeds]

Your RAM isnt looking too healthy by the looks of it, new RAM needed? You'll need to wait for rich to come back online but it's safe to say that they are showing signs of failure

Dave

 

[nostaw5]

ok cool but what about the hard drive not being able to be reconised by the new mobo?

 

[nostaw5]

the BIOS has no set hdd detection thing. it worked before but then today not reconised