Sorry if this has been asked before, new to this forum, but is there a way to run Dymo DiscPainter's 32bit only driver and software on Vista 64? Any help you can provide is much apprecated.
SanDisk Ultra SDSSDHII-960G-G25 960 GB SATA III SSD (System)
Crucial MX100 CT256MX100SSD1 256GB SATA III SSD (User Tree)
2 * Seagate Barracuda 7200.12 ST31000528AS 1TB 7200 RPM SATA II Mech. HD
Seagate ST1500DL001-9VT15L Barracuda 7200.12 1.5 TB S
PSU
Thermaltake Black Widow TX TR2 850W 80+ Bronze Semi-Mod ATX
Case
ThermalTake Level 10 GT (Black)
Cooling
Corsair H100 (CPU, dual 140 mm fans on radiator) + Air (2 *
Keyboard
Logitech G15 (gen 2)
Mouse
Logitech MX Master (shared)
Internet Speed
AT&T Lightspeed Gigabit duplex
Operating System
Sabayon Linux (current, weekly updates, 5.1.x kernel)
Manufacturer/Model
Lenovo ThinkPad E545
CPU
AMD A6-5350M APU
Motherboard
Lenovo
Memory
8 GB
Graphics card(s)
Radeon HD (Embedded)
Sound Card
Conextant 20671 SmartAudio HD
Monitor(s) Displays
Lenovo 15" Matte
Screen Resolution
1680 * 1050
Hard Drives
INTEL Cherryvill 520 Series SSDSC2CW180A 180 GB SSD
NEW DYMO Label Software Application Version 7.8 for Windows 2000/XP/Vista ONLY
According to the 'Read Me First' document, Vista 64-bit IS supported. Hope that this helps. Remember that you will need to install with administrative credentials.
Dwarf
(Taken from 'Read Me First' document, link below.
4 x 4GB DDR3-1600 Corsair Vengeance CMZ8GX3M2A1600C9B (16GB)
Graphics Card(s)
MSI GeForce GTX770 Gaming OC 2GB
Sound Card
Realtek High Definition on board solution (ALC 898)
Monitor(s) Displays
ViewSonic VA1912w Widescreen
Screen Resolution
1440x900
Hard Drives
OCZ Agility 3 120GB SATA III x2 (RAID 0)
Samsung HD501LJ 500GB SATA II x2
Hitachi HDS721010CLA332 1TB SATA II
Iomega 1.5TB Ext USB 2.0
WD 2.0TB Ext USB 3.0
SanDisk Ultra SDSSDHII-960G-G25 960 GB SATA III SSD (System)
Crucial MX100 CT256MX100SSD1 256GB SATA III SSD (User Tree)
2 * Seagate Barracuda 7200.12 ST31000528AS 1TB 7200 RPM SATA II Mech. HD
Seagate ST1500DL001-9VT15L Barracuda 7200.12 1.5 TB S
PSU
Thermaltake Black Widow TX TR2 850W 80+ Bronze Semi-Mod ATX
Case
ThermalTake Level 10 GT (Black)
Cooling
Corsair H100 (CPU, dual 140 mm fans on radiator) + Air (2 *
Keyboard
Logitech G15 (gen 2)
Mouse
Logitech MX Master (shared)
Internet Speed
AT&T Lightspeed Gigabit duplex
Operating System
Sabayon Linux (current, weekly updates, 5.1.x kernel)
Manufacturer/Model
Lenovo ThinkPad E545
CPU
AMD A6-5350M APU
Motherboard
Lenovo
Memory
8 GB
Graphics card(s)
Radeon HD (Embedded)
Sound Card
Conextant 20671 SmartAudio HD
Monitor(s) Displays
Lenovo 15" Matte
Screen Resolution
1680 * 1050
Hard Drives
INTEL Cherryvill 520 Series SSDSC2CW180A 180 GB SSD
Dymo doesn't have 64 bit drivers for this printer. I had to create a partition and install a full 32 bit Vista to get this printer to work.
I have a number of other devices that I needed to control with the laptop. All of them only had 32 bit drivers.
It's been an expensive lesson, but the 64 bit Vista does come in handy for performing some other complex tasks at much greater speed. The main drawback has been the reduction in disk space to get all this done.
I will have to connect an external drive to compensate for this: mainly it will be used for archival purposes.