Alright here is where we are at. I let the test run over night and came back to a BSOD 0x0000001a "MEMORY MANAGEMENT" error.
I have attached the dump files.
Also, Every time I start the "Small FFTs" test it seems to run fine for a while. Each time that I try and run the "Blend Test" this is what I get in Prime95 right away:
[Nov 8 06:44] Worker starting
[Nov 8 06:44] Setting affinity to run worker on logical CPU #1
[Nov 8 06:44] Beginning a continuous self-test to check your computer.
[Nov 8 06:44] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 8 06:44] Test 1, 9000 Lucas-Lehmer iterations of M8716289 using AMD K8 type-2 FFT length 448K, Pass1=448, Pass2=1K.
[Nov 8 06:44] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Nov 8 06:44] Hardware failure detected, consult stress.txt file.
[Nov 8 06:44] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Nov 8 06:44] Worker stopped.
[Nov 8 06:44] Worker starting
[Nov 8 06:44] Setting affinity to run worker on logical CPU #2
[Nov 8 06:44] Beginning a continuous self-test to check your computer.
[Nov 8 06:44] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 8 06:44] Test 1, 9000 Lucas-Lehmer iterations of M8716289 using AMD K8 type-2 FFT length 448K, Pass1=448, Pass2=1K.
[Nov 8 06:44] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Nov 8 06:44] Hardware failure detected, consult stress.txt file.
[Nov 8 06:44] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Nov 8 06:44] Worker stopped.
So I guess I am ready for the list to start testing everything!