System Files - SFC Command

How to Repair and Verify the Integrity of Vista System Files with System File Checker

information   Information
System File Checker (SFC) checks that all Vista system files are where they should be as they were by default and not corrupted, changed, or damaged. This will show you how to verify and repair the integrity of Vista system files with the System File Checker (SFC) command codes.
Tip   Tip
If SFC Cannot Finish or Repair a File:
NOTE:
This is for when after you run the SFC scan below, it cannot finish or repair a file. There is no guarantee that SFC can repair the system files if they are corrupted or damaged to much. If SFC still cannot repair them after this, then you might try running Check Disk (chkdsk), System Restore, a Repair Installation, or a clean reinstall of Vista.

1. How to Read the CBS.LOG
NOTE:
When SFC runs, it logs it's actions to the C:\WINDOWS\LOGS\CBS\CBS.LOG. You can find the specific SFC entries by searching for the [SR] tags in the log.
A) For how to see only the SFC scan details in the CBS.LOG:​
  • Open a elevated command prompt.
  • Copy and paste the command below into the elevated command prompt and press Enter.
    Code:
    findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt
  • Close the elevated command prompt.
  • Click on the sfcdetails.txt file that was just placed on your desktop to see the SFC scan details (ones with the [SR] tags) in the CBS.LOG.
  • You can safely delete the sfcdetails.txt file afterwards if you like.
2. Replace the Files that SFC Cannot Fix
NOTE:
If SFC cannot fix a file, it will be listed in the CBS.LOG above. Read the CBS.LOG to find out what file it is so you can replace it with a good copy.
A) For how, see:​
warning   Warning
Be aware that if you have modified your system files as in theming explorer/system files, running sfc/scannow will revert the system files such as explorer.exe back to it's default state. Make the appropriate backups of your system files that you have modified for theming if you wish to save them before running sfc/scannow.




Here's How:
NOTE:
If sfc cannot start or finish, then try running it Safe Mode.
2. In the elevated command prompt, type the command that you want to do in bold below in steps A to E to run System File Check.​
A) sfc /scannow - Scans the integrity of all protected system files and repairs the system files if needed. (See screenshot below)​
NOTE: Restores Vista's original setup of system files. (EX: Fonts, wallpapers, System32 files, etc.)
scannow.jpg

B) sfc /verifyonly - Scans and only verifies the integrity of all proteced system files only. (See screenshot below)​
NOTE: If it finds anything like in the screenshot below boxed in red at the bottom, you should run step A to see if it can fix it. See how to read the CBS log above for details on the SFC scan results.​
verifyonly.jpg

C) sfc /scanfile=(full path of file) - Scans the integrity of the chosen system file and repairs it if needed.​
EX: sfc /scanfile=C:\Windows\System32\kernel32.dll​
D) sfc /verifyfile=(full path of file) - Scans and only verifies the integrity of the chosen system file.​
EX: sfc /verifyfile=C:\Windows\System32\kernel32.dll​
E) sfc /? - For a list of all sfc command codes with description. (see screenshot below)​
SFC_Help.jpg


3. Press Enter.​
NOTE: It may take a while to finish.​
4. Close the elevated command prompt when it finishes.​
5. If you got a message to restart the computer in the command prompt, then restart the computer to finish the repair.​

Note   Note
If SFC could not fix something, then run the command again to see if it may be able to the next time. Sometimes it may take running the sfc /scannow command 3 times restarting the PC after each time to completely fix everything that it's able to.

If not, then download and run the 32-bit (x86) or 64-bit (x64) System Update Readiness Tool for your same installed 32-bit or 64-bit Vista, restart the PC afterwards, and try the sfc /scannow command again.

If still not, then you can attempt to run a System Restore using a restore point dated before the bad file occured to fix it. You may need to repeat doing a System Restore until you find a older restore point that may work.

If still not, then you can use the steps in the yellow TIP box at the top of the tutorial to manually replace the files that SFC could not fix.




That's it,
Shawn


 

Attachments

  • thumb_Device_Manager.png
    thumb_Device_Manager.png
    11.3 KB · Views: 418
Last edited by a moderator:
Sfc /scannow is finding corrupt files even after doing a chkdsk /f and a chkdsk /r (Good news is Chkdsk is still working at this moment in time). Windows Update downloaded 63 new files yesterday or something like that, personally I hate how it automaticly downloads stuff.

Should I do a system restore to yesterday when at least the sfc wasnt finding corrupt files?

If so is there a way to stop the automatic update? and should I stop them?
 
Last edited:

My Computer

System One

  • CPU
    Intel(R) Pentium(R) Dual CPU
    Motherboard
    Phoenix ROM BIOS PLUS Version 1.10 A11
    Memory
    2 Gb
    Graphics Card(s)
    Intel Graphics Media Accelerat
    Monitor(s) Displays
    15.4" Wide Screen XGA+ display with TrueLife™

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
I've got an interesting problem to add. Vista Home Premium XP1 Dell XPS1530 laptop. Won't boot at all (not even to safe mode). Got to command prompt with vista DVD. Ran chkdsk /r... no errors. Ran sfc by sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. Indicates it found corrupt files, but was unable to fix. Check c:\windows\logs\cbs\cbs.log. I can open this file with notepad from the command prompt, but the last entry is from 6 hours ago?! Is it not writing to the log? Any ideas? I feel excited that I'm getting closer to the root of the problem only to be shutdown at step that told me where the actual issue is. :( Please help! Thanks.
 

My Computer

Personally, I would do a clean install. Because if your not able to boot even in safe mood than your experiencing extreme problems. Even if you do get into the CBS.log the number of files that are probably corrupt will take forever for you to fix. You may want to check your BIOS though and see the order its having your computer boot in.
 

My Computer

System One

  • CPU
    Intel(R) Pentium(R) Dual CPU
    Motherboard
    Phoenix ROM BIOS PLUS Version 1.10 A11
    Memory
    2 Gb
    Graphics Card(s)
    Intel Graphics Media Accelerat
    Monitor(s) Displays
    15.4" Wide Screen XGA+ display with TrueLife™
Hello Pempey, and welcome to Vista Forums.

I'm sorry, but I must agree with MarryPoppins and recommend a clean reinstall of Vista. It sounds like your computer is beyond a simple repair. :(

Sorry,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Thanks everyone, I guess deep down in inside I felt everything was pointing to doing a clean install. My question is... I don't know what the original cause of the problem was and I really don't want a recurrence. If, for example, it was random bad sectors on the hard drive where important OS files were saved, is there a way to scan and mark them before (or during) the clean install? Are there other causes that I should do some sort of diagnostic process on first before the clean install?

Thanks again!
 

My Computer

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
I have run into a problem trying to remove a restore point. I used disk cleanup and TuneUp Utilities but it will not remove this restore point entitled UNKNOWN. It removed all up to it and then stoped. Tried several times. It says one file cannot be deleted, as it is currently in use or you do not have the necessary permissions. I will be reading all I can here but if you could send me in the right direction that would be great. I tried a screenshot but don't know how to do it or upload it. Thanks, as allways comments welcome. I just did a factory recover 7 days ago and man I hate to go thur that again, everything was going so great.
 

My Computer

System One

  • Manufacturer/Model
    H P Pavilion s3120n
    CPU
    AMD Athlon 64X2 Dual Core Processor 4200+ 2.20GHz
    Motherboard
    M2Nc51-AR
    Memory
    Ram 2.0 GB
    Graphics Card(s)
    NVIDIA GeForce 6150 LE Graphis
    Sound Card
    Realtex
    Monitor(s) Displays
    ViewSonic VX2035WM
    Screen Resolution
    1680X1050 pixels
    Hard Drives
    320GB 7200RPM Serial ATA
    PSU
    AC Bel Model#PC6012
    Cooling
    fan
    Keyboard
    PS2
    Mouse
    PS2
    Internet Speed
    10 down 1 up
    Other Info
    Computer has had the motherboard, power pak and tv tuner replaced. Using HP Deskjet F440 Printer, and IE9.

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Yes it worked, I did as you said and then created a Restore Point. The system said it was successful and I pick up 30GB of space not that I needed it but I did not want to go back and do all the downloads or SP1 again. Thank You so much:)
 

My Computer

System One

  • Manufacturer/Model
    H P Pavilion s3120n
    CPU
    AMD Athlon 64X2 Dual Core Processor 4200+ 2.20GHz
    Motherboard
    M2Nc51-AR
    Memory
    Ram 2.0 GB
    Graphics Card(s)
    NVIDIA GeForce 6150 LE Graphis
    Sound Card
    Realtex
    Monitor(s) Displays
    ViewSonic VX2035WM
    Screen Resolution
    1680X1050 pixels
    Hard Drives
    320GB 7200RPM Serial ATA
    PSU
    AC Bel Model#PC6012
    Cooling
    fan
    Keyboard
    PS2
    Mouse
    PS2
    Internet Speed
    10 down 1 up
    Other Info
    Computer has had the motherboard, power pak and tv tuner replaced. Using HP Deskjet F440 Printer, and IE9.
Your welcome William.

Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Thanks for this info! I was having a bugger of a problem with Windows' Programs and Features control panel app not opening, and running this process (and replacing several corrupt files manually) solved the problem! Now if only I could install Visual Studio 2008... Maybe this will fix that problem, too...
 

My Computer

Your welcome Severtki. You might post about the problem with Visual Studio 2008 in the Software forum to see what suggestions you may get to help you with it.

Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Hi all!!
In a miguided attempt to grab some more drive space, I deleted %SystemDrive%\Windows\System32\DriverStore\FileRepositor. Now vista won't recognise most of my usb devices.
Will System File Checker be able to help me?
I'm running a pre-installed version of Home Premium so I don't have a dvd to do a repair install.
Any suggestions would be much appreciated!!!!
Phanmo
 

My Computer

Hi phanmo, welcome to the vista forums, :party:

as it's system files you have removed you may want to try a system restore first

have a look here for info

Windows Vista System Restore Guide
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro x64 Latest Release Preview
    Monitor(s) Displays
    Acer G276HL 27", (DVi) + Samsung 39" HDTV (HDMI)
    Screen Resolution
    2 x 1920x1080 @50Hz
  • Manufacturer/Model
    Real World Computers (Custom by Me)
    CPU
    AMD FX8350 Vishera 8 Core @4GHz
    Motherboard
    Asus M5A78L-M USB3
    Memory
    32GB [4x8GB] DDR3 1600 MHz
    Graphics card(s)
    Asus nVidia GTX750TI-OC-2GD5 (2GB DDR5)
    Sound Card
    ASUS Xoner DG + SPDIF to 5.1 System + HDMI
    Monitor(s) Displays
    Samsung 32" TV
    Screen Resolution
    1920 x 1080
    Hard Drives
    Internal
    Crucial CT256MX100SSD1 256GB SSD,
    Seagate ST2000DM001-1CH1 2TB,

    External (USB3)
    Seagate Backup+ Hub BK SCSI Disk 8TB
    2.5/3.5 Hot Swap Cradle, USB3 + eSata (client HDDs)
    NAS 4TB
    PSU
    Aerocool Templarius Imperator 750W 80+ Silver
    Case
    AeroCool X-Warrior Red Devil Tower
    Cooling
    Hyper103 CPU, Rear 120mm, Front 2x120mm, Side 2x120mm
    Internet Speed
    68 MB Down 18.5 MB Up
    Other Info
    Six Sensor Auto / Manual Digital cooling (Fan) control with Touch control Panel
Thanks for the welcome!!

Unfortunately I didn't notice the problem for quite some time, not having needed any usb devices. All the system restore points I have are too recent to be any help. I'm going to try and copy the FileRepository from a friend's computer and stick it on mine.
Again, any suggestions would be very welcome!!
Cheers!!
 

My Computer

Hi phanmo,

It may be worth a try but honestly don't know,

you may want to look at this tutorial for a repair option for pre-loaded systems

http://www.vistax64.com/tutorials/141820-create-recovery-disc.html

if you go for the replacement option just be sure you backup everything before you start in case the worst happens and you can't get back in.
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro x64 Latest Release Preview
    Monitor(s) Displays
    Acer G276HL 27", (DVi) + Samsung 39" HDTV (HDMI)
    Screen Resolution
    2 x 1920x1080 @50Hz
  • Manufacturer/Model
    Real World Computers (Custom by Me)
    CPU
    AMD FX8350 Vishera 8 Core @4GHz
    Motherboard
    Asus M5A78L-M USB3
    Memory
    32GB [4x8GB] DDR3 1600 MHz
    Graphics card(s)
    Asus nVidia GTX750TI-OC-2GD5 (2GB DDR5)
    Sound Card
    ASUS Xoner DG + SPDIF to 5.1 System + HDMI
    Monitor(s) Displays
    Samsung 32" TV
    Screen Resolution
    1920 x 1080
    Hard Drives
    Internal
    Crucial CT256MX100SSD1 256GB SSD,
    Seagate ST2000DM001-1CH1 2TB,

    External (USB3)
    Seagate Backup+ Hub BK SCSI Disk 8TB
    2.5/3.5 Hot Swap Cradle, USB3 + eSata (client HDDs)
    NAS 4TB
    PSU
    Aerocool Templarius Imperator 750W 80+ Silver
    Case
    AeroCool X-Warrior Red Devil Tower
    Cooling
    Hyper103 CPU, Rear 120mm, Front 2x120mm, Side 2x120mm
    Internet Speed
    68 MB Down 18.5 MB Up
    Other Info
    Six Sensor Auto / Manual Digital cooling (Fan) control with Touch control Panel
Hi all!!
In a miguided attempt to grab some more drive space, I deleted %SystemDrive%\Windows\System32\DriverStore\FileRepositor. Now vista won't recognise most of my usb devices.
Will System File Checker be able to help me?
I'm running a pre-installed version of Home Premium so I don't have a dvd to do a repair install.
Any suggestions would be much appreciated!!!!
Phanmo
I agree do a system restore first, go back to a restore point when everything was working. There is a box that you can check to see all your restore points. If you can not do a sysrem restore, as a last resort do a system recovery from you disk that should have a partition D that you can use to put your computer back to the factory settings.To do a System Restore just click on control panel and if not allready click on classic view and locate Backup and restore center, double click on the icon and then click Repair Windows using system restore. Any problems just post back the people here are great to help. I don't know if System File Checker is able to help here perhaps someone else has the answer to that question.
 

My Computer

System One

  • Manufacturer/Model
    H P Pavilion s3120n
    CPU
    AMD Athlon 64X2 Dual Core Processor 4200+ 2.20GHz
    Motherboard
    M2Nc51-AR
    Memory
    Ram 2.0 GB
    Graphics Card(s)
    NVIDIA GeForce 6150 LE Graphis
    Sound Card
    Realtex
    Monitor(s) Displays
    ViewSonic VX2035WM
    Screen Resolution
    1680X1050 pixels
    Hard Drives
    320GB 7200RPM Serial ATA
    PSU
    AC Bel Model#PC6012
    Cooling
    fan
    Keyboard
    PS2
    Mouse
    PS2
    Internet Speed
    10 down 1 up
    Other Info
    Computer has had the motherboard, power pak and tv tuner replaced. Using HP Deskjet F440 Printer, and IE9.
Back
Top